To do so, you will need your chosen decking oil, a soft haired decking brush, a paint tray (or a bucket), and a cleaning rag, with turpentine or water (in order to clean up any spills). A sot haired brush is ideal, as it gives you the opportunity to soak up excessive oil and reapply it to other areas of your deck.

How do you keep a merbau deck clean?

To do so, you will need your chosen decking oil, a soft haired decking brush, a paint tray (or a bucket), and a cleaning rag, with turpentine or water (in order to clean up any spills). A sot haired brush is ideal, as it gives you the opportunity to soak up excessive oil and reapply it to other areas of your deck.

Can I clean deck with soapy water?

Despite the wide range of products on the market, one of the best ways to clean your deck is simply with soapy water and a brush the gentle pressurised water. It will clean the surface more effectively than you might think without damaging the finish.

What's the best thing to clean decking with?

To avoid damaging your decking, create a gentle cleaning solution with warm water and liquid dish soap. Alternatively, you can use a speciality wood deck cleaner. Saturate the surface and scrub the deck with a stiff-bristled brush or sponge until the cleaning solution starts to lather.

How do you remove stains from Merbau?

Bleach is also one of the best option to remove timber stains. Scrub vigorously with chlorine bleach then rinse the surface. Cover stain with a cloth soaked in bleach, repeating this process until a satisfactory result is achieved. Scrub regularly between bleach treatments.

When should I oil my new merbau deck?

You are correct 6 to 8 weeks of full sun to weather a new deck. Otherwise the tannin from the wood will just bleed the oil out and you would get a spotty finish on your deck.

Can you pressure wash Merbau?

Softwood like pine or cedar can only withstand 500 psi to 600 psi, whereas hardwoods like Jarrah, Spotted Gum and Merbau can sustain pressures up to 1,200 psi. If you’re not sure which type of wood you have, speak with a professional pressure cleaner for a free quote.

How do you keep Merbau looking natural?

Our Favorite combination for Merbau decking – 2 Coats of Light Oak with added Jarrah to maintain the natural appearance of the timber. We recommend Natural/Light Oak with a touch of Jarrah decking oil due to the minimal use of pigments which helps prevent further darkening of your timbers.

What is the best treatment for merbau decking?

Haymes Woodcare Dexpress deck and timber stain is the best decking oil for Merbau timber. It’s formulated for a long lasting finish that protects decking and weatherboards. Dexpress will enhance the look and the longevity of Merbau whilst protecting it from the harsh Australian climate that it can be exposed to.

Can I clean my deck with vinegar?

To clean your deck, combine 1 cup vinegar with 1-gallon water. Sprinkle baking soda on any mildewed wood and use the vinegar and warm water to scrub over all the boards. Borate is also a natural cleaner and versatile for indoor or outdoor cleaning.

Article first time published on

What household items can you use to clean decking?

Baking Soda, Vinegar and Dish Soap Everyone’s favorite natural cleaners can be used on the outdoor deck to tackle mildew and algae.

Should you pressure wash a deck?

A pressure washer can clean a wood deck much faster than you can scrub it by hand. That is a terrific advantage. However, a pressure washer will frequently destroy the surface of the wood. … Those that are not eroded can be dislodged, leaving the wood fuzzy or rough after it dries.

How do you clean outdoor decking?

1. Warm water can be used on its own to wash a wood or composite deck.
2. Liquid dish soap (ammonia-free) is safe for use on cleaning your deck when mixed with a little warm water. …
3. Oxygen bleach or powdered oxygen laundry cleaner is safe for use on wood decks and useful in removing mold or spores.

How do I clean my wood deck without a pressure washer UK?

1. Add half a cup of baking soda to one gallon of water;
2. Mix in 1/8 of dish-washing detergent;
3. Spray on your concrete deck and allow it to sit for half an hour;
4. Scrub thoroughly and rinse with a hose.
5. Apply a coat of concrete sealer to protect your deck from future stains.

Can you use washing up liquid to clean decking?

To avoid damaging the deck, create a delicate cleaning solution made up of warm water and washing up liquid. … Let the solution stand for 5-10 minutes, or according to the instructions on the deck cleaner if using. Lastly, rinse the area with clean water and leave the wood to dry.

Can you use bleach on decking?

Unfortunately, decks are often susceptible to dirt and algae because they’re outside. Contrary to popular belief, chlorine bleach is not a great cleaner for a wood deck. Luckily, you can use powdered oxygen bleach to scrub down and clean your deck without damaging the deck’s wood or any surrounding plantlife.

How do I get black stains off my deck?

Mix 1 cup of bleach into 1 gallon of water. Dip a scrub brush into the solution and spread it over the deck. Let it sit for several minutes before scrubbing up the mold. Rinse the deck when the black spots are gone.

Can I oil merbau straight away?

Merbau is a very resinous timber. In other words, timber finishes work best when you allow the timber to weather. … However, there is one exception to this where Preschem would recommend oiling the timber straight away, and that’s if the deck has been completed in the middle of a heat wave.

Can you use a pressure washer surface cleaner on a wood deck?

High-pressure surface cleaners can easily remove dirt and debris from the surface layer of your deck. Power washing is one of the fastest ways to clean a wood deck, but it’s important to be careful, as you can ruin your deck without taking the proper precautions.

What PSI Do I need to clean my deck?

For cleaning a wooden deck, you’ll be best served by using the lowest pressure setting that’s still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi. Choose the right tip to use as well.

How do I clean my deck without removing stains?

Baking soda will remove dirt, grime and odor from your deck without harming the stain. Furthermore, since baking soda is natural it will not harm children, pets, wildlife or plants. Baking soda can be used as a deck cleaner by mixing 1 cup soda with 1 gallon warm water.

How many coats of oil should I put on my deck?

With decking oil, two coats are usually sufficient, but a third coat can be applied for longer-lasting protection. It can take up to seven days after application for a decking oil to be fully cured, but the deck will be functionally dry well before this.

Does Merbau go GREY?

Answer: Merbau decking won’t bleed on its own. … The alternative is to leave the decking for some months so the tannin can wash out naturally, but in the process it will start to lose its colour and turn grey.

Do I need to sand my deck before oiling?

Sanding & oiling your deck is necessary to prolong the life of your deck. In order to remove damaged and splintered wood from your existing deck, it is necessary to sand the deck before applying any oils or stains. The deck must be smooth, clean, and free of debris before applying a stain or oil.

Can you put decking oil over stain?

Anyway, don’t apply oil over a deck stain. The deck stain works because it contains pigment and a binder (usually oil or water-based finish) to bond the pigment in the wood. You don’t want a build because it will peel if water gets underneath. … If the water stays puddled, the wood is sealed.

What is the best oil to use on decking?

1. Ronseal Ultimate Protection Decking Oil. …
2. Cuprinol UV Guard Decking Oil. …
3. Osmo 2-in-1 UV Protection Decking Oil. …
4. Manns Premier UV Decking Oil. …
5. Everbuild Lumberjack Wood Preserver. …
6. Barrettine Decking Oil. …
7. Liberon decking oil.

When should you oil a new deck?

For best results we recommend you oil your timber deck every six to 12 months. This will ensure longevity and keep your deck looking great. If you’ve just had your new timber deck installed it may be tempting to oil it straight away to give it that glistening shine, but you may need to let it weather beforehand.

Should I stain or oil my deck?

Whether you should oil or stain will come down to what you want from your deck. A stain will improve the appearance of the deck, but oil will better help preserve its condition. … However, you can bring back the natural look of the wood by using a pressure washer or choosing a decking oil with UV inhibitors.

Can you put water based decking oil over oil based?

ANSWER: Yes! but the underlying finish has to be absolutely dry. When using a water based topcoat over an oil based stain, allow oil based finishes, such as Java Gel Stain, to dry at least 72 hours before coating with a water based topcoat.

How often should you oil your deck?

How Often Do I Oil My Deck? Within the deck building industry, it is usually recommended that decks need to be oiled once every 6-12 months.

How do I clean my deck with baking soda?

Baking soda: Mix a gallon of water and a cup of baking soda, stirring up the solution until the baking soda is completely dissolved. You can then use a scrub brush or broom brush to thoroughly scrub the deck with the mixture before you rinse it clean with water.