The difference between a BR20, BR30, and BR40 is actually the size or diameter of the light bulb. The number represents increments of an 8th of an inch. For example, a BR30 is 30/8ths of an inch or 30 divided by 8 which equals 3.75″ in diameter. The same example applies to a PAR38.

What does BR20 mean?

BR20 | BR30 | BR40. PAR (short for Parabolic Aluminized Reflector) bulbs are lamps with “spot light” features, meaning that they provide a beam spread that is typically lower than 45°. Use PAR bulbs when attempting to put a focused beam of light on an object such as in track lighting or illuminating artwork.

What size is BR20?

ShapeDiameter (inches)ShapeBR202-1/2R16BR303-6/8R20BR384-6/8R30BR405R40

What is BR20 bulb?

What are R/BR20 Bulbs? Reflector (R) or Bulged Reflector (BR) 20 bulbs have a reflective coating on the inside of the bulb that directs light forward. … Like all light bulbs, the 20 value represents the diameter of the bulb in 1⁄8 of an inch. Therefore, a R/BR 20 light bulb is 2.5 inches in diameter.

Are PAR and BR bulbs interchangeable?

You can swap these bulb types to change from wide to spot, depending on what you need in each location. BR and PAR LED replacements for your traditional flood or spotlight bulbs not only create a different style light beam from each other, the bulbs also look different.

Are BR20 and R20 bulbs the same?

Don’t worry about it because the two are interchangeable! R20 is the name for the incandescent bulb while BR20 is the name used for LED bulbs. In case you were curious, “BR” is short for “bulged reflector” which means the back of the bulb is a reflector and the front of it is bulged out.

What is BR30?

What are R/BR30 Bulbs? Reflector (R) or Bulged Reflector (BR) 30 bulbs have a reflective coating on the inside of the bulb that directs light forward. … Like all light bulbs, the 30 value represents the diameter of the bulb in 1⁄8 of an inch. Therefore, a R30 is 3.75 inches in diameter.

What is the difference between A19 and BR30?

The shape is the first difference you’ll notice between the two bulbs. The “A” in A19 refers to the overall shape of the bulb. … The BR30 bulb is the complete opposite of the A19’s curved shape. “BR” stands for “bulge reflector,” which the bulb uses to point light straight ahead from its flat end.

What is BR30 vs PAR30?

The number following the letters in a recessed light bulb indicates size: it’s the diameter of the light bulb in eighths of an inch. So, a BR30 is 30/8 inches, or three and 3/4 inches. … The PAR denotes the light bulb has a parabolic aluminized reflector on its inside, directing light out.

What is the difference between MR16 and PAR16?

The lengths of a PAR16 bulb and a MR16 GU10 fixture, however, are different. The MR16 GU10 fixture 2.10 inches long whereas a PAR16 lamp is 3.15 inches long. In short, a PAR16 lamp will fit in a MR16 GU10 fixture but part of the bulb will be exposed.

Article first time published on

How big is a BR30 bulb?

For example, a BR30 is 30/8ths of an inch or 30 divided by 8 which equals 3.75″ in diameter.

Will a B11 bulb fit B10?

So yes, B10 and B11 (and CA10) bulbs are interchangeable as long as they all have the right fixture size to fit your wall sconces or candelabra base.

What does BR mean in light bulbs?

BR stands for “bulged reflector.” These bulbs traditionally had a bulged reflector inside the housing to increase the amount of light they put out, giving them a slightly bulging shape. This also creates a softer light to view a wide area without harsh edges or intense shadows.

Where can I use BR30 bulbs?

BR30 light bulbs deliver soft-edged, directional light and can typically be found in general household light fixtures, recessed can lighting, and/or track lighting. Their lighting is less precise and produces less shadow than PAR bulbs, but they are great for fixtures that use dimmer switches.

Is BR30 the same as E26?

The BR30 is for an E26 light socket, while the A19 is for an A19 socket. The E26 is a smaller / thinner socket and is a lot less common than the A19. … Br30 is a wide end ‘flood type’ bulb designed to replace br30 bulbs common in recessed ceiling light fixtures.

What is the difference between PAR20 and BR20 bulb?

R20 can either be a PAR20 or a BR20. The main difference between the 2 is the beam angle of the light. BRs spread the light with a 120 degree beam angle, while PARs create a focused light with 40 degree beam angle.

Is BR30 Dimmable?

Philips BR30 LED flood light bulbs provide 650 lumens of soft white, dimmable light, equivalent to 65-watt incandescents with 80% less energy use. These bulbs fit standard medium base (E26) fixtures and are ideal for recessed can style lights.

What are R30 bulbs?

R30 bulbs are a style of flood light bulb with a reflective coating on the inside of the bulb. Similar to other R-style bulbs, most R30 bulbs are frosted to create a softer light and reduce glare. The designation of 30 is used to indicate diameter in 1/8 of an inch.

What is E26 bulb?

The term E26 refers to a light bulb’s cap or base – the bulb component that allows for both electrical and mechanical contact. The letter “E” in E26 refers to Edison Screw, the most standard of lamp bases, while the numerical “26” refers to its diameter in millimeters (approximately 1 inch).

What is the difference between par 20 and R20?

An R20 bulb is commonly used for regular room lighting, or to provide soft illumination for a specific area. … A PAR20 bulb is best used when a crisp, focused beam is desired. This type of bulb works well to illuminate artwork or specific points where diffuse lighting is not wanted.

What is a type A15 light bulb?

A15 bulbs are slightly smaller than A19 bulbs and typically come in outputs ranging from 10 watts to 40 watts. These smaller wattages are frequently used in applications such as appliances, signage and decorative lighting.

What is soft white vs warm white?

Color temperature Soft white (2,700 to 3,000 Kelvin) is warm and yellow, the typical color range you get from incandescent bulbs. … Warm white (3,000 to 4,000 Kelvin) is more yellowish-white. These bulbs are best suited for kitchens and bathrooms. Bright white (4,000 to 5,000 Kelvin) is between white and blue tones.

Does BR30 come in short neck?

PAR30 short necks are more often used in track lighting while the long necks are often used in recessed lighting cans. BR30 bulbs do not offer this option.

What is the difference between par 30 and par 38 light bulbs?

PAR30 bulbs are great for larger rooms where multiple light fixtures are being used. Short neck PAR30 bulbs are more common for tracking lighting while long neck PAR30 bulbs are useful for recessed cans. PAR38 BULBS are primarily used for outdoor lighting. PAR38 bulbs can be used as general flood and safety lights.

Is E26 bulb same as A19?

An E26 screw-in bulb has a 26 millimeter diameter screw as its mounting method, but the lamp itself can be of a variety of shapes and sizes. The standards that govern the dimensions and design of A19 light bulbs also dictate that it must use an E26 screw base. In other words, all A19 light bulbs also have an E26 base.

What base is BR30?

Medium base (E-26) | BR30 | Incandescent Light Bulbs.

Is BR30 a standard?

A19 and BR30 are simply two different standardized shapes for light bulbs. … The digits that follow the A, refer to the diameter of the bulb – measured in eighths of an inch. The BR30, however, has a flat end which is better equipped to provide directional lighting.

What is PAR16?

What are PAR16 Bulbs? Parabolic aluminized reflector (PAR) 16 bulbs control light more precisely. They produce about four times the concentrated light intensity of general service A shape incandescents, and are used in recessed and track lighting. … Therefore, a PAR 16 is 2 inches in diameter.

Is Gu 5.3 the same as MR16?

3? It’s simply another name for an MR16. It might sound confusing, but the one thing to remember is that GU5. 3 refers to the actual fitting on an MR16 (the 2 spiked prongs).

What is the difference between PAR16 and PAR20 LED bulbs?

We mentioned that LED PAR16 Bulbs are the smallest in diameter of all the PAR Bulbs, and the PAR20 bulb is one size larger. While a PAR20 and a PAR16 Bulb can have the same base size, the dimension of the bulb is what differs. This is important when using existing fixtures because the fit might not be the same.

Will BR30 fit BR40?

The 30 and 40 refer to the size of the bulb in 1/8 inches — 30/8 and 40/8 inches respectively. … For 4″ cans, you cannot choose BR40 bulbs — they’re too big. For 5″ cans, a BR30 will fit with a little space to all sides while a BR40 will fit with little to no space on the sides.